Let \( \quad \begin{aligned} U & =\{1,2,3,4,5,6\} \\ A & =\{1,2,3\} \\ B & =\{1,3,4\} \\ C & =\{4,5\}\end{aligned} \) List the elements of the following sets. (a) \( (A \cup B)^{\prime} \), (b) \( A \cap B \cap C \), (c) \( A^{\prime} \cap B \cap C \), (d) \( A^{\prime} \cap C^{\prime} \)

Jim works in an automotive repair shop. A manufacturer that supplies spark plugs says the spark plug gap should be \( 0.048^{\prime \prime}-0.052^{\prime \prime} \). Determine the: a) tolerance b) nominal value

Express each measurement in the following form: measurement \( \pm \) uncertainty a) Barry measures a 2 m piece of particle board using a tape measure that is marked in 1 mm increments. b) A poultry farmer prepares 15 mL of antibiotics in a syringe marked in 1 mL increments c) The speedometer on a car reads \( 35 \mathrm{~km} / \mathrm{h} \) with speed marked every \( 5 \mathrm{~km} / \mathrm{h} \)

How many CV joint to be fitted in a front wheel drive vehicle

List FIVE fundamental angles on wheel alignment.

State the measurement with a minimum of 47.5 and a maximum of 52.5 cm in the form: Nominal value \( \pm \frac{1}{2} \) (tolerance)