Pregunta
upstudy study bank question image url

8. A 35.0 g bullet strikes a 5.0 kg stationary piece of lumber and embeds itself in the wood. The piece of lumber and bullet fly off together at \( 8.6 \mathrm{~m} / \mathrm{s} \). What was the original speed of the bullet?

Ask by Davey Floyd. in Canada
Mar 12,2025

Solución de inteligencia artificial de Upstudy

Respuesta verificada por el tutor

Responder

The original speed of the bullet was approximately \( 1.24 \times 10^3 \, \text{m/s} \).

Solución

Let the mass of the bullet be \( m_b = 0.035 \, \text{kg} \) and the mass of the wood be \( m_w = 5.0 \, \text{kg} \). The bullet embeds into the wood, so by the conservation of momentum the initial momentum of the bullet is equal to the combined momentum of the bullet and wood after the collision. The momentum conservation equation is \[ m_b v_b = (m_b + m_w)v_f, \] where \( v_f = 8.6 \, \text{m/s} \) is the final velocity and \( v_b \) is the original speed of the bullet. Solving for \( v_b \): \[ v_b = \frac{(m_b + m_w)v_f}{m_b}. \] Substitute the given values: \[ v_b = \frac{(0.035 \, \text{kg} + 5.0 \, \text{kg}) \times 8.6 \, \text{m/s}}{0.035 \, \text{kg}}. \] First, calculate the total mass: \[ m_b + m_w = 0.035 \, \text{kg} + 5.0 \, \text{kg} = 5.035 \, \text{kg}. \] Then the bullet speed is: \[ v_b = \frac{5.035 \, \text{kg} \times 8.6 \, \text{m/s}}{0.035 \, \text{kg}}. \] Calculate the numerator: \[ 5.035 \times 8.6 \approx 43.301 \, \text{kg} \cdot \text{m/s}. \] Now, divide by \(0.035 \, \text{kg}\): \[ v_b \approx \frac{43.301}{0.035} \approx 1237.17 \, \text{m/s}. \] Thus, the original speed of the bullet was approximately \( 1.24 \times 10^3 \, \text{m/s} \).

Respondido por UpStudy AI y revisado por un tutor profesional

error msg
Explicar
Simplifique esta solución

Bonus Knowledge

To find the original speed of the bullet, we can use the principle of conservation of momentum. The total momentum before the collision must equal the total momentum after the collision. Before the collision, only the bullet has momentum, given by \( m_b \cdot v_b \) (where \( m_b \) is the mass of the bullet and \( v_b \) is its velocity), and the lumber is stationary. After embedding, the combined mass moves with a velocity of \( v_f = 8.6 \mathrm{~m/s} \). The equation is: \[ m_b \cdot v_b = (m_b + m_l) \cdot v_f \] Where: - \( m_b = 0.035 \, \text{kg} \) (mass of the bullet), - \( m_l = 5.0 \, \text{kg} \) (mass of the lumber), - \( v_f = 8.6 \, \text{m/s} \). Plugging in the values: \[ 0.035 \cdot v_b = (0.035 + 5) \cdot 8.6 \\ 0.035 \cdot v_b = 5.035 \cdot 8.6. \] Now calculate \( 5.035 \cdot 8.6 \) to find the momentum after the collision and solve for \( v_b \). Calculating gives: \[ 5.035 \cdot 8.6 = 43.701. \] So, \[ 0.035 \cdot v_b = 43.701 \\ v_b = \frac{43.701}{0.035} \approx 1249.17 \, \text{m/s}. \] Therefore, the original speed of the bullet was approximately \( 1249.17 \, \text{m/s} \).

preguntas relacionadas

Build Your Roller Coaster Use the simulation to build and test your own roller cooster design. 1. If you made any changes during the Exploration Questions, click "Reset" again. 2. Right-click the track and select "Roller Coaster Mode". This keeps the skater attached. 3. Notice that you can zoom out to give yourself a wider view. You may want to do this as you build your coaster. 4. Drag in new pieces of track to manipulate the curves. 5. Drag and drop the rider to the location of the beginning and observe. DO NOT MAKE CHANGES YET. a. The ride probably was not successful on the first attempt. If not, what physics concept(s) was violated? b. Identify several adjustments you need to make. 6. After making the initial adjustments, try the ride again. Continue making adjustments until the ride becomes successful (rider makes it from one end to the other completely - does not have to make it back through). 7. Draw a side-view sketch of your successful design below. 8. Label the points of acceleration on your sketch. a. Down arrow = slowing down b. Up arrow = speeding up c. Circle arrow \( = \) changing direction 9. Click the "Track Friction >" button and adjust the setting. 10. Run the rider through your track again and observe the changes. a. Did the rider make it to the end? b. What do you notice differently about the pie chart and/or bar graph? 11. Describe the changes you need to make to your design, as a result of the presence of friction. 12. Make the necessary adjustments until you achieve a successful ride with friction. 13. Draw a side-view sketch of your friction-savyy coaster below.

Latest Physics Questions

¡Prueba Premium ahora!
¡Prueba Premium y hazle a Thoth AI preguntas de matemáticas ilimitadas ahora!
Quizas mas tarde Hazte Premium
Estudiar puede ser una verdadera lucha
¿Por qué no estudiarlo en UpStudy?
Seleccione su plan a continuación
Prima

Puedes disfrutar

Empieza ahora
  • Explicaciones paso a paso
  • Tutores expertos en vivo 24/7
  • Número ilimitado de preguntas
  • Sin interrupciones
  • Acceso completo a Respuesta y Solución
  • Acceso completo al chat de PDF, al chat de UpStudy y al chat de navegación
Básico

Totalmente gratis pero limitado

  • Solución limitada
Bienvenido a ¡Estudia ahora!
Inicie sesión para continuar con el recorrido de Thoth AI Chat
Continuar con correo electrónico
O continuar con
Al hacer clic en "Iniciar sesión", acepta nuestros términos y condiciones. Términos de Uso & Política de privacidad